Circuit Topology:		Twin cascode FET and bipolar low level input signal stages. High-voltage, 100% discrete, symmetrical high-bias Pure Class A amplifiers.
Input Type and Load:		Superior transformer, balanced low-ratio 1500 ohm input load.
Maximum Mic Level:		+36dB balanced XLR pin 2 hot (with -20dB passive attenuator).
Maximum Instrument Level		+30dB balanced 600 ohms, DC coupled, discrete Class A.
Input Attenuator:		-20dB resistive pre transformer primary, sealed silver relay.
Phantom Power:		+48v regulated 50mA capability, sealed silver relay.
High Pass Filter:		Passive, variable from 30Hz to 185Hz @ 6dB per octave, sealed silver relay.
Polarity Reverse:		Sealed silver relay on microphone input.
Gain Range Input:		+20dB to +64dB in 2dB steps.
Maximum Output Level:		+30dB unbalanced 600 ohms, DC coupled, discrete symmetrical Pure Class A.
Output Type:		XLR connector, pin 2 hot (optional balanced JT-1 transformer).
Noise EIN Unweighted:		-126dB 150 ohm.
Noise 20kHz Unweighted:		-100dB
Distortion THD, IMD:		0.05% nominal
Frequency Response -3dB:		1Hz to 120kHz transformer limit.
System Bandwidth:		DC to 1MHz
Output Meter:		High quality, illuminated analog VU meter 0dB = +4dB.
Peak Meter:		Bi-color LED's 0dB and +20dB peak detection circuit.
M5 Dimensions:		8.5 x 3.5 x 12 in (216 x 88 x 305mm) half rack width.
Weight:		15lbs (6.8kg)
Dimensions of Shipping Carton:		24 x 21.5 x 7.5 in (610 x 546 x 190mm)
Weight-Packed:		25lbs (11.4kg) includes B2T power supply and cables.
AC power supply B2T:		External toroidal 100V to 240V, 50-60Hz selectable,
		150 watts maximum.
Cables:		1 x 8ft 4 pin ac cable, 1 x 8ft standard IEC cable included.
Dimensions:		5 x 7 x 3.25 in (127 x 177 x 83mm)
Weight:		7lbs (3.2kg)
Rack mount kit (1) RM-1:		Single M5 19 inch rack mount kit (holds one half rack unit).
Rack mount kit (2) RM-2:		Dual M5 19 inch rack mount kit (holds two half rack units).