| Circuit topology |
Three (3) dual triode vacuum
tubes (Sovtek 6922), high-voltage discrete Class A mode. |
| Input gain range |
Balanced, Class A, 20k ohms,
-20dB to +16dB with high gain switch |
| Maximum input level |
+36dB balanced XLR pin 2 hot |
| Maximum output level |
+30dB balanced 600 ohms, DC
coupled, discrete Class A |
| Output type |
XLR connector, output trim
gain -45dB to +6dB |
| Noise 20kHz unweighted |
-92dB |
| Distortion THD, IMD |
0.5% |
| Frequency response -3dB |
1Hz to 200kHz |
| Gain reduction meter |
High quality, illuminated
gain reduction meter 0dB to -20dB range |
| Output meter |
Twin 20 segment LED VU meters
with -27dB to +30dB range |
| Compressor type |
Optical passive attenuator |
| Make-up gain |
Variable 0dB to +10dB stereo
tracking |
| Threshold - Ratio |
Threshold variable -30dB to
+20dB, ratio-compression variable 1:1 to 20:1 |
| Attack - Release |
Attack variable 2mS to 200mS,
release variable 100mS to 5 seconds |
| Side-chain spectral contour |
Variable threshold -15dB to
+15dB, frequency 70Hz to 9kHz twin ranges |
| Equalizer type |
Discrete Class A, passive
design optimized for full range program material |
| Frequency bands (6) |
Variable amplitude LF +/-24dB
15Hz shelf response |
| |
Variable amplitude MF1 +/-8dB
125Hz selected Q response |
| |
Variable amplitude MF2 +/-4dB
500Hz selected Q response |
| |
Variable amplitude MF3 +/-4dB
2kHz selected Q response |
| |
Variable amplitude MF4 +/-10dB
5kHz shelf response |
| |
Variable amplitude HF +/-20dB
32kHz shelf response |
| AC power |
Internal toroidal 100v to
240v, 50-60Hz selectable, 70 watts maximum |
| Dimensions |
19 x 12 x 3.5 in (482 x 305
x 89mm) |
| Weight |
22lbs (10kg) |
| Dimensions-shipping carton
|
21 x 18 x 8 in (533 x 457
x 203mm) |
| Weight-packed |
26lbs (11.8kg) |